This is our product,
Metromed by Medtek presents;
Metromed Centrifuge MD 12 CE.
The following is how the Medtromed Centrifuge MD 12 CE operates:
1. Connect the adapter cable to the product and power supply.
2. Prepare a tube containing the liquid, and make sure it is tightly closed.
‼️ DON’T FILL THE LIQUID IN THE TUBE WITH MORE THAN 1/2 TUBE CAPACITY ‼️
3. Open the Centrifuge lid, insert the tube, and close it again.
‼️ WHEN PUTTING THE TUBE ON THE CENTRIFUGE, MAKE SURE POSITION THE TUBE IS CROSSED SO THE SPIN IS BALANCED ‼️
4. Power on the switch until it turns green, and set the speed and timer knob.
5. Don’t open the Centrifuge lid until it has stopped completely, marked with a “TING!” sound.
6. Open the Centrifuge lid, take out the tube, then return the speed knob to the initial position or 0, and press the power off switch until the green light turns off.
7. Unplug and trim the adapter cable again.
